Commercial Garage Doors: GX-175-20 (R-16) • Garex

A PROFESSIONAL PRODUCT FOR INTENSIVE USE

The GX-175-20 door is made of heavy 20 gauge white steel with reinforced 3″ hardware. We can find the GX-175-20 steel door in commercial, industrial as well as agricultural environments.

Available in Smooth, Woodgrain, Smooth Grooved, and Woodgrain Grooved finish, the many possibilities of combinations tailored made and the quality of the materials and of the assembly are among the benefits of choosing the GAREX GX-175-20 steel commercial garage door.

See how this product can not only enhance the look of the building but most important, resist the bad weather and to intensive use.

 

Specifications

  • R-16 urethane insulation:
  • High structural resistance ensures panel rigidity.
  • Insulation able to withstand Canadian winter conditions.
  • Double-lip door jamb seal and panel seals.
  • High-gauge anchor plates installed in every Garex door panel to ensure solid hinge attachment.
  • More rigid 3″ Industrial rails
  • 1 standard color of paint finish, possibility to have a door with custom paint finish
  • Features the new Rot-Proof Extruded Polystyrene XPS End Block

Door Dimensions:

Garex can manufacture the GX-175-20 steel garage doors up to 6,0 m (20 ft) wide and up to 4,68 m (16 ft) high.

All of our doors can be assembled with panels of 45, 53, and 60 cm (18, 21, or 24 inches).

Color

RANGE OF COLOURS

The GAREX selection of colours are from oven-baked polyester based paints and meet high quality standards. Colours shown may differ from the actual colours of the doors. Request a color sample by mail.

Steel door

  • White

    White

  • Personalized Colors

    Personalized Colors

Technical informations

Technical specs

DESCRIPTION
OF COATING
STEEL 20 ga
Metal thickness 0.89 mm (0.035 po)
Isolation factor RSI 2.81 (R-16)
Isolation density 40 kg/m3 ( 2.5 lbs/pi3 )
Door Thickness 44.5 mm (1 3/4″)

OPERATOR CONFIGURATION

Garex can configure a door operator to fit the available space. Standard High Ceiling Full Vertical Lift Limited Space Roof Slope

HARDWARE

All hardware is mounted in proportion to door weight and frequency of use.
Garage Door:

  • Industrial Door – Weight below 544 kg (1200 lb)

STANDARD FEATURES

  • 12-gauge steel tracks.
  • 13-gauge steel hinges.
  • Double hinges on doors over 12 feet wide.
  • Crossbar installed for doors over 12 feet wide.
  • 12-gauge steel spring supports.
  • Rollers 3 inches in diameter with ball bearings.

Documentation and maintenance